Fill Station

FS-5001-1-S Single Position Fill Station Without Control Panel

SKU: FS-5001-1 Category: Tags: , ,


The FS-5001-1-S Single position cylinder fill enclosure, fills one SCBA or SCUBA cylinder at a time. The enclosure provides increased safety during the fill process, only operating when the door is closed and locked. The FS-5001 is designed to contain the destructive force of an accidental cylinder failure or hose rupture, while allowing the energy blast to be vented away from the operator.

NFPA 1901-71, 23.9.1-4 Compliant

Also available in 2 and 3 positions.
Call for information.

Additional information


Exterior Cabinet Contains ¼” Steel Plate On All Four Sides, Drawer Contains ½” Steel Plate Construction & ¼” Steel on Three Sides of the Cabinet., Result is ½” Steel On All Four Sides, Fabricated By ISO 90002 Company, Laser Cut, & Certified Welded, Zinc-Rich Powder Coat Quality Finish, Vented Through Rear and Bottom of Cabinet, All Control Components Located Inside Cabinet

Standard Features

Teflon Slides To Protect Cylinder from Scuffing, (1) Connection for Cascade System, (1) Fill Hose w/SS Bleed Valve and 347 Fill Adapter, (1) Panel Valve to Control Fill Process, (1) Fill Gauge to Monitor Fill Process

Safety Features

NFPA 1901-71, 23.9.1-4 Compliant, Certified By A Licensed Engineering Testing Facility, Tested to Contain Rupture of an 88 Cubic Ft. Cylinder at 4500 PSI, Carriage Tilt Design Minimizing Operator Fatigue, Safety Interlock Control System Preventing Operation Unless the Front Access Door is Completely Closed and Locked in Place


20.5”W x 23.5”D x 38”H, Approx. 400lbs.

For Orders, CALL