This 2 position fill station fills two SCBA or SCUBA cylinders at a time. The enclosure provides increased safety during the fill process, only operating when the door is closed and locked. The FS-5022-2-M is designed to contain the destructive force of an accidental cylinder failure or hose rupture, while allowing the energy blast to be vented away from the operator.
NFPA 1901-71, 23.9.1-4 Compliant
| Construction: | Exterior Cabinet Contains ¼” Steel Plate On All Four Sides, Drawer Contains ½” Steel Plate Construction & ¼” Steel on Three Sides of the Cabinet., Result is ½” Steel On All Four Sides, Fabricated By ISO 9002 Company, Laser Cut, & Certified Welded & Sand Blasted, Zinc-Rich Powder Coat Quality Finish, Vented Through Rear and Bottom of Cabinet, All Control Components Located Inside Cabinet |
|---|---|
| Standard Features | Teflon Slides To Protect Cylinder from Scuffing, (1) Connection for Cascade System, (2) Fill Hoses w/SS Bleed Valve and 347 Fill Adapter, Adjustable Regulator 0-6000 PSI w/Inlet & Outlet Pressure Gauges, (2) Panel Valve to Control Fill Process, (2) Fill Gauge to Monitor Fill Process |
| Safety Features | NFPA 1901-71, 23.9.1-4 Compliant, Certified By A Licensed Engineering Testing Facility, Tested to Contain Rupture of an 88 Cubic Ft. Cylinder at 4500 PSI, Balanced Carriage Tilt Design Minimizing Operator Fatigue, Safety Interlock Control System Preventing Operation Unless the Front Access Door is Completely Closed and Locked in Place |
Product images are representative and for illustrative purposes only. Actual product appearance and components may vary slightly due to product improvements, supplier availability, or component substitutions. Any substitutions will be of comparable quality and will not materially affect the intended function or performance of the product.
